Product Description

Screw Air Compressor Air Cooled Refrigerator AIR DRYER for cooling compressed air gas

 

Reliable and economical performance
Threaded pipelines of the heat exchanger increase the using rate of cooling air. The evaporator is made from laminose copper pipeline with aluminum flake, high efficiency, and low energy consumption. Condenser made from fin copper, good heat exchanging rate without CZPT and jam

Environmental friendly
Aluminum-alloy-made heat exchangers never get rusted, strong anti-corrosion property, pollution reoccurrence free. Environmental cooling medium adopted across the series, keeping up with the international trends of environment protection

Top configuration
The whole series of refrigerated compressors are of first-class brands, such as PERFORMER, KERRY, COPELAND, and MANEUROP Whole series of refrigeration control elements are of first-class brands, such as DAN FOSS and ALCO
Whole series of air coolers adopt nanometer anti-corrosion coating on the surfaces

Total Control
Easy to use controller automatically manages dryer operation while monitoring critical parameters for optimum air treatment and efficiency

Flexible Design
Air-cooled and water-cooled options and compact size to fit any application Easy for installation and free maintenance

Air cooled refrigeration dryer
                      Model
Item   
EAD-01s EAD-01 EAD-02 EAD-03 EAD-06 EAD-07 EAD-08 EAD-10 EAD-13 EAD-15 EAD-18 EAD-25 EAD-35 EAD-45
Air capacity(Nm3/min) 0.6 1.2 2.4 3.8 6.5 7.2 8.5 10.7 13.5 15.2 18  25 35 45
Voltage(V/50Hz) 220 220 220 220 220 220 220 380 380 380 380 380 380 380
Comp-Power(KW) 0.58 0.59 0.75 0.89 1.23 1.55 1.7 1.9 2.01 2.34 2.6 3 4.5 7.5
Fan Power(W) 95 95 95 150 150 150 180 180 240 240 240 240 720 850
Inlet dia G1″ G1″ G1″ G1-1/2″ G1-1/2″ G1-1/2″ G2″ G2″ G2″ G2.5″ DN65 DN80 DN100 DN125
Weight(kg) 48 52 65 82 96 109 127 145 176 198 210 298 420 550
Size L(mm) 650 650 900 1000 1000 1120 1200 1300 1450 1550 1620 1860   1960
W(mm) 450 450 470 500 520 580 580 580 620 700 700 780 850 950
H(mm) 610 620 680 690 730 790 790 840 870 990 1075 1410 1410 1610

Configured High quality CTA class precision Filter

Configured High quality CTA class precision Filter Element
Welcome inquiry for special pressure and special size for OEM customize order

FAQ

Q1:Are you the factory or trading company? 

A4: Absolutely! You have touched the primary sources of Air /Gas Compressor FATORY founded in 2002. 

 Q2: What’s your main products? 
A: Screw Compressor, Natural Gas Compressor, LPG/CNG compressor, Hydrogen gas compressor, Oxygen gas compressor, CO2/ CO compressor, Methane Compressor, etc, the whole industrial / Petrochemical/ Oil field/ Medical hospital all kinds of high-pressure big capacity applications and related products. 

Q3: How long is your gas compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.

Q4: How long could your air compressor be used?
A: Generally, for all our gas compressor designed service life more than 25 years, with good regular maintenance.

Q5: Does your company accept customization?  
A: Yes, of course. With rich experience doing ODM  customize compressor according to clients’s  different detail using conditions. And sales team 24 hours on-line service available. 48hours problem solved promise.

Q6:  What’s payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.

Q7: How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.

Q8: Can we visit your factory?

A: Sure, welcome to visit our factory.

 

 

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China 1.2m3/Min Air-Cooled Air Compressor Dryer  China 1.2m3/Min Air-Cooled Air Compressor Dryer

Co2 air compressor

As one of the co2 air compressor manufacturers, suppliers, and exporters of mechanical products, We offer co2 air compressors and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of co2 air compressor.

Recent Posts