Product Description

100% fresh air heat pump packaged rooftop air conditioner
1. Hotel air source heat pump
2. CE, RoHS approved
3. Easy installation and maintenence
4. High efficiency
5. Low noise level
ZheJiang Shenglin provides customers with high-quality and high-effect products based on advanced production technologies, mature manufacturing processes and strict quality controls and keep communicating with understanding customers demands, which repays us with self improvements and the trust and recognition of customers

Hotel air source heat pump:
1. Economical operation
Generally cost less to operate than other types of conventional heating systems, save your electricity or gas bills.
2. Safety
Operate at a high efficiency with no flames, fumes, or flues; Water and electricity isolated
3. Environmental friendly
Transfer heat that’s already in the environment; Low CO2 emissions.
4. Easy operation
With intelligent control systems which convenient and simple operation
5. Constant hot water supply
Provide hot water no matter in cloudy day, snowy day or at night, unlike solar collectors which have to be facing the sun.
6. Heat pump water heater can be applied to sanitary hot water, house heating.
Quality Control
NewTimes air to water heat pump water heater production quality control:

1. Research and Development

We have more than 30 well-qualified technology elites.
Our R&D team has many years experiences of heat pump, we We have been committed to improving the COP, technology, and defrosting items.

2. Purchasing

In order to ensure heat pump quality, we purchasing department purchase good quality materials according to each model heat pump BOM list.
We demand each spare parts supplier has products testing report, and relative CCC, ISO certificates, from compressor, expansion valve and so on core material to small parts such as screw, shim and so on. Our quality department strictly inspect on all materials.

3. Production

Each worker must operate seriously according to production operating standard, pay attention to each installation link, both copper pipe welding and electric controlling connection are both finished with professional technology. Each production line will be responsible for its procedure.

4. Checking
The quality department will check each procedure of heat pump. And each heat pump water heater must be checked seriously before leave our factory, COP, heating capacity must be reach national standard, all parameters such as current, pressure, and water temperature and so on must be recorded, each heat pump test report is stored.

5. Package

The qualified heat pump is packaged by especial designed cartoon or fumigation wooden frame before send to our warehouse, avoid hitting.
6. Services:

Supply OEM service for customers.
Produce heat pump according to customer’s special demands.
Supply free spare parts according to order quantity.
Long warranty period.
We are Detail Oriented, Focus on Quality, Never Cut Corners’.

Model SLA20D SLA30D SLA50D SLA60D SLA100D SLA200D SLA300D
Input power (KW) 1.8 2.9 4.4 5.4 8.8 17.6 21
Heating capacity (KW) 7.5 12 19 22 38 76 88
Cooling capacity (KW) 5.4 9 14 17 28 56 65
Hot Water supply(L/H)   160 280 400 500 800 1600 2000
Rated voltage (V) 220 220/380 380 380 380 380 380
Rated frequency (HZ) 50/60  
Rated current (A) 8 13/6 9 12 18 35 40
Rated outlet water temp (°C) 55
Outlet water Max temp (°C) 60
Source side water flow L/H 2000~2400 3600~4000 5500~6500 7000~8000 11000~13000 22000~26000 25000~30000
Hot water side water flow L/H 2000 3600 5500 7000 11000 22000 25000
Pipe Size DN25 DN25 DN25 DN32 DN32 DN50 DN50
Dimension(mm) 657*557*780 1030*685*720 1150*740*720
Packing dimensions (mm) 730*630*920 1100*755*865 1230*820*865
Weight (KG)  88 125 170 175 360 640 660
Leve of security IP×4
Electric shock protection grade 1 Grade
Noise (Db) 40  45 50 50 55 55  55 
Refrigerant R417A/R407C/R404A/R410A/R134A
Compressor Panasonic Danfoss
Condenser:Double pipe heat exchanger
Evaporator: Plate heat exchanger,
Throttle unit: “Emerson” Thermal expansion valve
Body: Spray coating.

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China 100% Fresh Air Heat Pump Packaged Rooftop Air Conditioner  China 100% Fresh Air Heat Pump Packaged Rooftop Air Conditioner

TAGs:

Co2 air compressor

As one of the co2 air compressor manufacturers, suppliers, and exporters of mechanical products, We offer co2 air compressors and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of co2 air compressor.

Recent Posts